VALTRACK-V4-MFW-ESP32-C3 4G-LTE GPS Asset Tracker – Without enclosure
₹4,720.00 incl. GST
Module Selection Guide :
- A7672S-FASE – 4G-LTE-CAT1 + 2G + GNSS- For India & Asia
- A7670C-MNNV 4G LTE-CAT1 + GNSS For India & Asia (No 2G fallback)
- A7672E – 4G-LTE-CAT1 + 2G + GNSS – For Europe, Africa
- A7672SA- 4G-LTE-CAT1 + 2G + GNSS – For South America, Australia
- SIM7672G – 4G LTE CAT1 +GNSS For Global use (PTCRB certified)
- SIM7672NA- 4G LTE CAT1 + GNSS for North America (PTCRB certified)
Antenna Selection Guide :
Device has onboard patch antenna soldered on the PCB. For using external active antenna a bias resistor needs to be connected to the antenna point. So when you select external antenna option the bias resistor will be added and the patch antenna will be disconnected.
On board passive Patch Antenna : Bias resistor removed and you can use onboard patch antenna for GNSS reception. Enclosure will not have a SMA cutout.
with External Active antenna support : You need to connect an external active antenna to the U.FL connector on PCB, if you ordered the enclosure, you need to make a hole to draw the antenna out.
(Antenna needs to be ordered separately)
-
- VALTRACK-V4-MFW-ESP32-C3 is a 4G-LTE enabled Asset tracking device.
- It is small in size, low cost & easy to install.
- The device can be powered using 3.7V-4.2V Li-Ion or Li-Po battery.
- Device supports HTTP, MQTT or SMS protocol.
- Get your location on map or cloud or by SMS.
- Device can be configured protocol modes using Bluetooth Android App.
- Device is enabled for low battery consumption
- Application: Track your valuable assets such as gold ornaments, expensive items, luggage, children, elderly people (including those with dementia), as well as motorcycles and cars.
Specifications :
| Operating Voltage | 3.7V to 4.2V DC |
|---|---|
| Model No. | VALTRACK-V4-MFW [ESP32-C3] |
| Dimensions | With Enclosure – Length: 72mm * Width: 43mm * Height: 21.5 mm PCB Dimensions – Length: 58.2mm * Width: 30mm * Thickness: 7.8mm |
| Battery | 3.7V LiPo battery |
| Charging mode | USB Type-C |
| GSM | A7672x 4G LTE module |
| GPS | A7672x inbuilt GNSS |
| Inputs | None |
| Operating Modes | HTTP, SMS, MQTT/TCP |
| Configuration Methods | USB(by Firmware), Bluetooth |
| Processor | ESP32-C3-FH4 |
| Motion Sensor | 12-bit 3-axis Accelerometer |
| Memory | NA |
| Antenna | U.FL (GSM, GNSS), Inbuilt Antenna (GNSS) |
| Connectivity | Bluetooth, GPRS, SMS, Call |
| Debug Interface | USB |
Download Setup Application :
Related Content Videos : (Firmware setup is same VALTRACK-V4-VTS so you can use these videos)
| Weight | 0.2 kg |
|---|---|
| Cellular Module | A7672E-FASE, A7672S-FASE, A7672SA-FASE, SIM7672G-MNGV |
| GNSS Antenna | External Active Antenna, On-board Passive Patch Antenna |
Related products
Out of stock
Out of stock
In stock
VALTRACK-V4-VTS-ESP32-C3 4G-LTE Vehicle GPS Tracker
From: ₹5,350.00 incl. GST Select options This product has multiple variants. The options may be chosen on the product page
VALTRACK-V4-MFW-ESP32-C3 4G-LT...
₹4,720.00 incl. GST