This adapter PCB can be used to connect the Flex connector available on newer tracking devices programming lines to programmers like STLINK-V2 using header wires.
Whats included :
1x 10 pin FFC adapter PCB soldered with right angle headers .
1x 10 pin same direction FFC cable.
Supported devices :
All VALTRACK-V4 series and VALTRACK-V2MF
STLINK-V2 shown in image is not included, you need to order it separately.
Note : You will also need a STLINK-V2 / STLINK-V3 / JLINK programmer/Debugger along with this adapter to load the firmware. You can buy them from online vendors like Mouser/Digikey/Element14